|
Post by LUCKY☆ on May 30, 2016 0:22:41 GMT
low and behold, 900mhz has better transmission over distance and its also called the 33 centimer band. imagine a private directional comunications link that can also be used to fry your neighbors, and oh the symbology of those numbers.
|
|
|
Post by LUCKY☆ on May 30, 2016 0:44:25 GMT
|
|
|
Post by Amaterasu Solar on May 30, 2016 15:50:59 GMT
The numbers indeed!
|
|
|
Post by LUCKY☆ on May 30, 2016 18:37:13 GMT
www.catchpenny.org/shafts.htmlthis details pyramid shafts.these are resonant chambers and one paragraph describes going to an oval shape.almost all microwave systems ive put in have oval shaped conduit.its a pain in the butt to work with because you cant bend certain tight angels with it.imagine copper tubing 1.5inches x 2.75 inches cross section.and thats the small stuff.very hard to bend. im starting a microwave thread to take the conversation and notes there.
|
|
ArMaP
Junior Member
Posts: 75
|
Post by ArMaP on May 30, 2016 19:49:39 GMT
sorry that quoted wrong. anyways, its a compound of evidence. a fridge puts off a sound, an oven puts off a sound, an airoplane, i know what a microwave failing sounds like. What I was trying to ask was: do you know why a microwave failing make that sound? The only evidence you've shown was that you heard a sound and that the app you have (I suppose on your phone or something like that) showed a smaller magnetic field, everything else were assumptions made by you, like assuming that all the magnetic field shown by the app was the result of some kind of microwave thing working from your neighbour's house, 350 yards away. (a small parenthesis to ask: can you ear a failing microwave 350 yards away? I ask because the two microwave ovens we had and that broke never made a sound, only stopped working) In cases like this, like in any science related topic, I think the best option is always to first gather data, analyse it and then make a theory based on that. Next, test the theory to see if you can find any flaw and only if you can't then you can assume that your theory is right.
|
|
|
Post by LUCKY☆ on May 31, 2016 0:24:57 GMT
thats why i like your clear judgement armap and have piled the evidence up. also when microwave oven fans stop,if the spot they stop at is wrong,it can cause the magnetron to resonate.this makes a loud hum.ive been in radio rooms below towers and recognize microwave sound.its a special tone.as luck would have it,the wind was blowing right that day and as its in the frequency that i can hear at.i easily picked out its location.then i saw tommy drive there on his mule cart.get out and work on it.i watched as my metersignal strength had earlier dropped.by 1/3power.so i wrote him letter ,explaining how to properly tune it.at which time he turned it off and now im gaining weight.more calm,sleeping better.i also had right after my arrest ,tracked the signal to tommies.but i was behind barier of trees,so he couldnt see me do it.after two triangulations.i went to front drive ,where he could see me.i stared at direction and meter dropped off. a few weeks later i told his next door neighbor in road that he was doing it.a few days later i got screenshot of meter with it on and off,while sitting in my chair.in living room.580 versus 150 when off.theres no doubt it was him. then add that all the neighbors arou d him have gone nuts.6 around his house and one next door to his other property where he runs cattle.
|
|
|
Post by LUCKY☆ on May 31, 2016 0:33:12 GMT
plus day that it hummed,his neighbor had just got bad sick and didnt know why.i think he had parts misadjusted and leakage getting into his next door neighbors house.i showed the screenshots to his neighbor ,of the normal and high reading.next day tommie was in neighbors yard and they were talking. this is strait up freemason harassment to gain financial advantage and terrorise people to sell out.i know alot of his freemason friends as i thoughtthey were my friends too.i learned not.the locals have outed theirselves by the latest actions.there final word to me before signing over my deed to cover bail and impound fee,was,this is strictly business,you understand,this is strictly business. well this is strictly business then.karmas a bitch.
|
|
|
Post by LUCKY☆ on Jun 29, 2016 3:46:54 GMT
i didnt give up on motor. i took the old slip and rewetted it. stuck it in a bowl, mushed it up, let it set until it was almost dry, smashed it into a pizza pan and set it in the sun. a week later i flipped it over and dryed it some more. it never cracked. so as in previous post, way back, im gonna buy new slip and dry the stuff almost out. no more messing with wet slip, im gonna treat this stuff like clay and form it instead of pouring it. i will use clean slip and im also going to get a thrust bearing race instead of a regular bearing race. the new race will be almost flat like a plate, with just slightly raised edges. no more central collumn heat expansion worries. as magnetic field will hold plumbbob down tight to hold dropa in place on thrust bearing race. so borderline success in how not to make a dropa stone and a more feasible manufacturing technigue coming soon. robo got a job so funding is about to increase a bunch. new horizons coming soon.
|
|
|
Post by Amaterasu Solar on Jun 29, 2016 15:49:52 GMT
Congrats on the job, robo! And glad You've found a work-around for the problems You're having on that slip stuff and design!
|
|
|
Post by LUCKY☆ on Jun 30, 2016 21:40:34 GMT
i want to add, it rained a quarter inch a few days ago, with the disc still setting outside, no cracks or anything. using porcelain as a clay, definitely is the way to go. once i get some change in my pocket, i will be buying more slip. then its on!
|
|
|
Post by LUCKY☆ on Jul 1, 2016 18:12:58 GMT
U-tokyo.ac.jp › t › photon › papers › Xray
excellent pdf, makes me wonder if all the new ufos are carbon nanotube outer structures
|
|
|
Post by Amaterasu Solar on Jul 1, 2016 21:43:09 GMT
Not sure what to make of that "link" there, robo. I can't fix it because I don't know what's going on there.
|
|
|
Post by LUCKY☆ on Dec 5, 2016 8:17:01 GMT
|
|
|
Post by LUCKY☆ on Dec 5, 2016 8:18:54 GMT
these are vinca symbols recovered from balkans,dated around 5000bc.very similar to dropa and sumerian,a swastika was also in the grouping.
|
|
|
Post by Amaterasu Solar on Dec 5, 2016 13:58:18 GMT
The psychopaths in control like to defile symbols. They took the Eye of Consciousness - which I use in My avatar - and made it a symbol of evil, as They did with the swastika. Once the symbol meant wholeness, happiness, the galaxy, prosperity. By attaching it to the nazis, They defiled it in Our view. And symbols only have the power, the meaning, We attach to them...
|
|
|
Post by LUCKY☆ on Feb 12, 2017 10:47:23 GMT
Ive been away a while and im just letting folks know,i lost my job 7days after starting. Ive been struggling to get my bills paid and heal from the microwave experience.never in my lifetime would i have guessed my neighbor was doing what he was doing.im suppose to go to court over the charges the corrupt titus county cops threw on me.when booked on entree,i told them of microwave and they never investigated,then sheriff let alot of folks go.never heard excuse. On booking they said i was arrested for resisting arrest.yea right.then 4 hours later came in with disorderly conduct and felony fleeing.cop had no right to arrest me.i was protesting the corruption in titus county and the two cops proved it again.i was provoked by them and it is a legal grounds for dismissal.i will be representing myself as there are no competent lawyers in texas that i trust.
I plan to get back building the dropa stone but im even looking into improvising to just get a voltage reading. Im trying to find a thrust bearing race but not having much luck.i may just take a thick metal plate and beat it into shape then weld it onto caduceus coil. So as usual im broke but hopefully the economy will improve and i can go forward with completion.
|
|
|
Post by Amaterasu Solar on Feb 12, 2017 20:06:13 GMT
So sorry about all the mess You've got going there, robo. May it all rectify positively immediately!
|
|
|
Post by LUCKY☆ on Apr 11, 2017 1:01:02 GMT
|
|
|
Post by Amaterasu Solar on Apr 11, 2017 1:39:44 GMT
Wow, robo. Attention-getting. Not sure what I am looking at other than the original graphic made to flicker...
|
|
|
Post by LUCKY☆ on Dec 28, 2017 3:14:52 GMT
Yeah im not willing to pay photobucket to third party my pics,so they arent seen.sorry folks.if someone request,ill provide link. So anyways i started go fund me to help finance me while i finish the caduceus.maybe enough people will think my idea is worth finishing.im at gofundme,robert garrison caduceus.im asking for ten grand to finish it or partners.if you have read this far.odds are you too realize the functionality and engineering going into this.so heres to helping me finish my idea.this money will support me while i focus on the build.
|
|
|
Post by Amaterasu Solar on Dec 29, 2017 5:21:21 GMT
Put Your images onto imgur.com/ and relink, or add again.
|
|
|
Post by LUCKY☆ on Dec 29, 2017 6:22:50 GMT
This is a pic,i just learned how to download directly to this website.no more third party pics.click on it to see it in action.its the same glowing ball as a ufo when completed.the same type plasma pulsing only at a slower speed. Attachments:
|
|
|
Post by Amaterasu Solar on Dec 30, 2017 3:57:30 GMT
NICE!
|
|
|
Post by LUCKY☆ on Jan 1, 2018 5:21:24 GMT
www.gofundme.com/fund-my-scienceHeres the go fund me link. Since i can properly post pics.ill try to get some pics of where im at on the caducius. Basically,the microwave killed my ceramic lady,she died last christmas.so im currently without a ceramic supply. Nobody believed my theory on microwave and the cops thought it a joke.so they shot radar gun at my house and triggered my wifes schizophrenia. The neighbor that murdered these folks is supposedly dying of lung cancer.i dont know. Supposedly the college has ceramics so i may go there and see if they can help. I need some touch up welding on caduceous as it leaks and i have not found steel thrust plate yet.ive filed for the forth time on ssi and took psych exam.it came back fit to work,so im not some crazy nut job.what ive posted in past and this project are true.i hope to finish this so we can all see the truth.
|
|
|
Post by Amaterasu Solar on Jan 1, 2018 22:33:39 GMT
Best of luck, robo. Maybe start a new thread - this one is quite long with lots of missing images - explaining Your goals and the GFM link, with pics and drawings. If You do that, I'll tweet it out, often. Try for a catchy title, and remember that the first line or two of the first post will be seen - so make that catchy, too.
I hope this takes off for You!
|
|
|
Post by LUCKY☆ on Jan 2, 2018 17:24:28 GMT
Thankyou for the advice amy,i may do that.yes it has become a long thread. Lots of history of how things happened and how i discovered the technology. Notepads are great for that.to give life to a story.lol! Its not dull for me though! Deep down in history is this caduceus story.just tiny hints.from my research it looks like its the thread thats humanities thread. I suspect its been the driving force behind kingdoms.the very toppest secret.the way empires rise and fall.the way empires were funded.how families have held power using magic technology and gold.
|
|
|
Post by Amaterasu Solar on Jan 2, 2018 21:21:44 GMT
To be sure, the useless ELiters, the psychopaths in control, have withheld information from Humanity. I will say that part of the holding of power in families has everything to do with the inbreeding. They are psychopaths, and primary psychopathy is genetic, so They inbreed to retain the psychopathic gene. They wouldn't want heirs that actually felt compassion and empathy for Others, for the Humans They beset with Their lies, propaganda, indoctrination, and other nefarious machinations.
|
|
|
Post by LUCKY☆ on Jan 30, 2018 12:10:35 GMT
This was posted by zorgon ,he says his dad is in it.t townsend brown is in it.this vid should be national archived,imho. Theres also multiple references to florida around 1959.
|
|
|
Post by Amaterasu Solar on Jan 30, 2018 17:22:58 GMT
ZORGON says HIS dad is in the vid??? He never mentioned, that I'm aware, that HIS dad too worked with Brown. I looked and think I MAY have seen MY dad at 18:52, and a few other points, but all are so brief and low res, it's hard to tell. That is surely the time frame Dad was working with Brown... Maybe Dad was behind the cam... If so, no surprise on not seeing Him.
Anyway, yes. I remember going to Florida - We were supposed to be there for three months, but whatever it was Dad was working on was cancelled a couple of weeks in. We did watch a rocket take off - an Atlas, I think - at Cape Canaveral... Anyway, thank You for posting this, robo!!!
|
|
|
Post by LUCKY☆ on Apr 11, 2018 10:09:53 GMT
|
|