ufo motor notepad

notice this guy has what looks like a staff with a high voltage insulator right above his hand.and has two ankhs in his hands.
im thinking the ankh is a high voltage tool also.it seems to go in the end of the staff.some tales of the ankh is the giver of life.maybe the ankh is the giver of charge to a craft and the other head was to take the charge away by grounding it.

here is a djed/high voltage insulator.
if you read wikis theories,they  envolve religion and wild theories of worshipping trees and the djed is a tree.i laugh.

That looks more like a slug than a snake.

We also have snakes like that in Portugal, the way snakes move depends on the type of ground they move on, not on the type of snake, as all snakes are able to move in the same ways.

by having the hole offset by just a little,the tuning of the unit can be made easier.imagine you are looking up at ceramic bottom.this pic is what you would see.by turning the ceramic slowly in one direction or another.it will slowly move the plumbob tip to a more refined position of accuracy between the two top tubes.the term used for this is cam.it would be way easier to tune it this way.the pic is exagerated to show offset easier.

with casting ,patience is the main rule.i just finished my last one and it turned out ,ok?
i just want to show charge build up on emitter.
then there will be a tear down of top tube connections and reweld with precision.
as i get to this more,im finding precision is a necessity but how much ,im not sure.hopefully not perfection.
what im worried about is i will need to make the four way top tube connection like a knights templar cross,basically venturies.to get velocity of gas up to higher speed for higher rate of charge.

the plumbob would go in the top tube and the top tube would be the ceramic part . basically the gas velocity would go up with the three tubes ,down and two horizontals would be venturied.

Seeing if this helps...

They are physically the same, so they can move in the same way, the ones used to move through the grass move in one way while the ones used to move on sand and rocks move in the other. I think there's also a third way of moving, but I'm not sure now.

PS: "cobra" is a Portuguese word, it means "snake".

hawkings reply
if yall remember,when over at pegasus,i had mentioned that i got into it with steven hawkings interns or followers over at physicsforum.net.
well it took six months but sh admitted he was wrong.
im now about to take on a nasa image of the same black hole theory.nasa released this image that same summer, claiming a blackhole would look like this,yet sh says they dont exist? kinda strange.
this all started because i stated xrays can and do escape a blackhole.now its known.i emailed a los alamos guy and he said that he thought they are neutron stars.not blackholes.
so because of that,the xray beam coming off them under xray image ,should go to the very center,not just above the center.the center should be completely covered by the xray output .like a white beam of light.on a xray observatory camera.

Having seen news both of "new discoveries" in black holes and the "proof" they don't exist, I ponder what is going on there. I surely have no skill Myself to make an informed evaluation.